Elf Bar ELFX Replacement Refillable Pods - Pack of 3

Vaping technology never stands still, and Elf Bar has consistently led the way. With the arrival of the ELFX system, Elf Bar (now frequently operating as EBDESIGN) has successfully connected the dots between disposable ease and refillable longevity. The ELFX Replacement Refillable Pods sit at the core of this system, built specifically for the new ELFX Kit and the ELFX Pro – and you'll find them right here at Vaping Supplier.

These aren't ordinary pods. They mark a genuine step forward in coil design, flavour delivery, and everyday usability. Read on for a complete walkthrough, including full specs, device compatibility, a simple setup guide, and answers to the most common questions.

What Makes Them Different?

The Elf Bar ELFX Replacement Pods were created to tackle the biggest gripes vapers have with standard pods: coils that die too quickly, liquid leaks, and weak flavour. Thanks to the Dual Mesh Coil Design, these pods can last up to twice as long as a regular mesh pod. That translates to fewer pod changes, less waste, and more money left in your pocket over time.

But it's not just about durability. Elf Bar has also put serious focus on flavour accuracy. The dual mesh structure increases the surface area touching your e-liquid, giving you a deeper, richer taste that rivals much more expensive rebuildable tanks – all in a straightforward, plug-and-play pod.

Another major plus is the Anti-Leak Technology. Leaking pods are annoying, wasteful, and can even ruin your battery device. The ELFX pods come with upgraded seals and smarter internal design to stop condensation and e-liquid from escaping, so your device stays clean and your pockets stay dry.

And then there's the Top Fill system. Unlike bottom-fill pods that need to be taken out before refilling, top-fill lets you top up instantly without taking anything apart. It's a small change that makes a big difference, especially when you're out and about.

Key Benefits at a Glance

• Dual Mesh Coils – Up to twice the lifespan of standard mesh, with richer flavour

• Anti-Leak Technology – No more messy spills or damaged devices

• Top Fill Design – Refill quickly and easily without removing the pod

• MTL Optimised – Perfect for Mouth To Lung vaping, closely matching cigarettes or disposables

• Two Resistance Choices – 0.6 Ohm and 0.8 Ohm to match your preferred e-liquid and throat hit

Technical Specifications

Here's a full rundown of what these pods offer.

0.6 Ohm vs 0.8 Ohm – Which One Is Right for You?

Your choice of resistance comes down to how you like to vape. Here's how the two options compare.

Flavour Strength

• 0.6 Ohm: Maximum flavour intensity

• 0.8 Ohm: Still strong, but slightly more subtle than the 0.6 Ohm

Cloud Size

• 0.6 Ohm: Moderate to large vapour clouds

• 0.8 Ohm: Smaller, more discreet clouds – ideal for vaping out and about

Throat Hit

• 0.6 Ohm: Smooth and gentle

• 0.8 Ohm: Firmer, sharper throat hit, much like a traditional cigarette

Coil Life

• 0.6 Ohm: Slightly shorter life because it draws more power

• 0.8 Ohm: Generally lasts longer between changes

Best E-Liquid Match

• 0.6 Ohm: 60VG/40PG, 70VG/30PG, or 80VG/20PG

• 0.8 Ohm: 60VG/40PG or 50/50 nic salts

Draw Feel

• 0.6 Ohm: A bit looser than a typical MTL draw, almost a restricted Direct Lung feel

• 0.8 Ohm: Tight, cigarette-style MTL draw – very natural for ex-smokers or disposable users

Compatibility – Read This First

Important: ELFX pods are not universal. They are made exclusively for the newest generation of Elf Bar devices.

Works perfectly with (available at Vaping Supplier):

• ELFX Kit – The standard refillable pod kit from Elf Bar

• ELFX Pro – The upgraded version with adjustable airflow and a larger battery

Will NOT work with:

• Older Elf Bar devices like the Mate 500, Elfa, or any disposable products

• Any third-party brands, including Vuse, Blu, SMOK, or GeekVape

Always double-check that you're buying ELFX pods for an ELFX series battery. Using the wrong pods can cause connection problems, leaks, or even damage to your device's battery contacts.

How to Set Up and Use Your ELFX Pods

Follow these steps carefully to get the best flavour and the longest possible pod life.

Step 1: Get the Pod Ready
Take the ELFX pod out of its packaging. Look at the bottom to confirm whether it's 0.6Ω or 0.8Ω. Remove any protective stickers from the bottom contacts or the fill port.

Step 2: Fill It Up

• Find the top-fill port – a small silicone plug on the side near the top of the pod

• Flip open the flap to expose the fill hole

• Insert your e-liquid bottle nozzle and squeeze gently

• Don't fill beyond the 2ml line. Aim for about 90% full to leave room for air pressure

• Press the silicone flap closed until it clicks or seals shut

Step 3: Prime the Coil – Don't Skip This

• Do not start vaping straight away

• Let the filled pod sit for 5 to 10 minutes. This gives the dual mesh cotton time to fully absorb the e-liquid

• For best results, take 3–4 dry puffs (inhale without pressing the fire button) to help draw liquid into the coil

Step 4: Insert Into Your Device

• Make sure your ELFX Kit or ELFX Pro battery is charged and switched on (usually 5 clicks of the fire button)

• Slide the pod into the slot. It should click or magnetically snap into place with very little effort. Never force it.

Step 5: Start Vaping

• For 0.8Ω pods: Set the airflow to a tighter setting (on the ELFX Pro) and take slow, steady MTL puffs

• For 0.6Ω pods: Open up the airflow a bit more for longer, fuller draws

Step 6: Knowing When to Swap Pods
These pods are disposable – the coil is built in and can't be replaced. When the flavour fades, starts tasting burnt, or vapour production drops off significantly, throw away the old pod and grab a fresh one from your 3-pack.

Frequently Asked Questions

Q1: How long will a single ELFX pod last me?
A: Thanks to the dual mesh design, expect roughly 10 to 15 refills or 1 to 3 weeks of normal use. Heavily sweetened e-liquids (candy or dessert flavours) will reduce that lifespan.

Q2: What e-liquid works best with these pods?
A: Anything under 1 ohm (sub-ohm) needs a VG ratio of 60% or higher. Stick to 60VG/40PG, 70VG/30PG, or 80VG/20PG. Avoid 50/50 liquids – they're too thin and can cause spitting or leaking.

Q3: How can I prevent leaking?
A: The pods already have Anti-Leak Technology, but for extra peace of mind: always close the top fill flap properly, don't leave your vape in a hot car (heat makes liquid thinner), avoid overfilling, and store your device upright when you're not using it.

Q4: Can I replace just the coil inside?
A: No. The coil is permanently installed inside the plastic pod. Once it burns out, you swap out the whole 2ml pod. That's why they're sold as complete replacement pods rather than separate coils.

Q5: Why does my throat feel harsh?
A: On the 0.6Ω pod: It should feel smooth. Harshness usually means your nicotine level is too high (for example, 20mg nic salts will be very harsh). Use 3mg–12mg freebase instead. On the 0.8Ω pod: A stronger throat hit is normal. If it's too much, try a lower nicotine strength.

Q6: Will these pods fit the original ELFA device?
A: No. ELFA uses closed, pre-filled pods. ELFX is the open, refillable system. They're completely different and not interchangeable.

Q7: What's the price at Vaping Supplier?
A: At Vaping Supplier, a pack of 3 genuine ELFX pods costs just £3.90 – fantastic value for a premium refillable pod system.

Q8: How do I know it's time to change the pod?
A: Look out for any of these three signs: a burnt, dry taste even when the pod is full; very weak or no flavour; or gurgling and spitting (a sign the coil is flooded and worn out).

Q9: Are these pods suitable for nic salts?
A: Yes, but proceed carefully. The 0.8Ω pod works well with nic salts (10mg–20mg) because it runs at lower power and gives a tight draw like a disposable. The 0.6Ω pod is too strong for high-strength nic salts (20mg) – stick to low-nicotine freebase (3mg–6mg) with that one.

Q10: Do the same pods work in both the ELFX Kit and the ELFX Pro?
A: Yes. The pods are identical. Only the battery devices differ. Both resistances work fine in either device.

The Bottom Line from Vaping Supplier

The Elf Bar ELFX Replacement Refillable Pods are a fantastic option for anyone moving away from disposables and looking for a more affordable, flavourful, and dependable refillable setup. The dual mesh technology genuinely delivers longer life and better taste, while the anti-leak design and top-fill convenience remove the usual headaches of pod systems.

At only £3.90 for a three-pack from Vaping Supplier, these pods offer exceptional value for money. Whether you go for the 0.6Ω for bold flavour and bigger clouds, or the 0.8Ω for a sharp, cigarette-style draw, the ELFX system is a serious upgrade.

Shop the complete ELFX range today at Vaping Supplier – your trusted source for authentic pods, coils, and all your vaping needs.